Ten Things You Learned In Kindergarden That Will Help You Get Double Glazing Lock Repairs

· 6 min read
Ten Things You Learned In Kindergarden That Will Help You Get Double Glazing Lock Repairs

Double Glazing Lock Repairs

The best locks for your doors and windows can stop burglars from getting into your home. In general, they don't enjoy breaking glass or squeezing through open windows.

Certain double glazing owners however, have encountered issues with their window or door lock after the installation. These problems can often be solved without the need to replace double glazing.

Broken or faulty locks

A locksmith can fix your uPVC window lock or door lock if it's damaged or broken. They can fix the striker plates, hinges, and locks on your double-glazed. They can also move the cylinder around to fix any misalignment problems which could cause the handle to not function properly.

The mechanism might be jammed when the key fits into the lock, but it will not turn or become difficult to insert. Dirt or grease can be trapped in the mechanism. If this is the situation it is possible for the lock to be cleaned and lubricated. It is crucial to use a dry lubricant, like graphite or teflon, rather than oil, which can attract dirt and adhere to the inside of the mechanism. After the lubrication, insert the key into the lock and turn it. The lubricant needs to work its way into the mechanism, and the lock should turn effortlessly.

A damaged lock can be caused by loose screws in the lock mechanism. They can loosen, fall out, or even break off completely, preventing the lock to function properly. A screwdriver is a tool to tighten the screws but care must be taken not to tighten them too much because this could cause damage to internal components.

A broken lock can be hazardous for you and your family. This is especially the case if you have children. It is possible for them to unlock the door without knowing and thus allow them access to your home. If you're worried that this could happen, a vetted professional locksmith can help you secure the double-glazed doors.

Misty Glaze are a professional uPVC and double glazing company in Lancing and can repair all kinds of damaged and broken mechanisms handles, handles, cylinders, and lock systems on both uPVC windows and doors. We can also reconfigure your uPVC or double glazing locking system to meet your particular requirements, which means that in many cases replacement windows and doors are not required.

Broken or Faulty Handles

Many double glazed windows feature a multi-point lock as a part of the overall security package. This is a great choice for those who are concerned about opportunistic thieves looking to gain entry to your home. It's also worth asking your locksmith about anti-lift blocks that can be installed with the locks already in place and help keep your window firmly locked in a closed position.

It's not uncommon for the handles to be damaged or fail - they are the first part of your window to be pushed open by criminals intent on breaking into. The good news is that this is one of the easiest parts to fix.

Modern uPVC handles as well as aluminium handles come with a multi-point locking mechanism, referred to as Espagnolette, which is designed to ward off forced entry. This upgrade to security is typically provided as an additional option on new uPVC window installation. Older uPVC and aluminium handles can be upgraded to lock systems that shoot bolts, again as an optional option on double-glazed windows.

It is crucial to fix a handle as soon as possible if it is damaged. A damaged handle could prevent the window from closing properly and allow drafts to enter. It can also be a flaw that thieves can exploit, putting your family's belongings and your personal belongings at risk.

To repair the broken mechanism, first access the window frame and remove the damaged handle. The gearbox is then accessed to determine the kind of gearbox used to open the handle. This will permit a replacement that matches the profile and the internal window frame mechanisms.

After the mechanism has been replaced the handle can be returned to the original screws. However, we recommend replacing them with longer screws to ensure the most secure fit. The final step is to apply a layer of clear sealant to shield the handle from further corrosion. After you've completed this step, your window should be fully functional again at a fraction the cost of replacing it.

Hinges that are Broken or Faulty

If your windows aren't shut properly, draughts could be able to enter, your home's security barriers will become weaker and there's an increased risk of water damage or damp. Broken or defective window hinges are a frequent problem that can be fixed easily.

If you have a window made of uPVC that isn't able to open or close it's likely that the hinges are damaged or broken and require replacement. Many window companies will require you to buy a new window unit to resolve this problem, but we can replace the hinges and save you money.

Window hinges can be damaged by repeated use or weakened over time by corrosion. If you have a broken window hinge, it's essential to take steps to avoid further damage. This includes not forcing the window to close or open.

Identifying your hinge type will help you identify the correct parts to fix it. The most commonly used types of window hinges are Maco, Mila, Roto and other brands. It's best to consult an expert in this regard so that you don't make the mistake of buying parts that are not compatible with your current hardware and cause further damage.

Faulty hinges can be a big issue for your uPVC windows and doors. They can be an important source of noise, and they can also permit water to enter your windows.

Verify whether the pin barrels on both sides of the hinge are aligned. If it's not, tap the head pin using a hammer to make a small bend in the hinge barrel. This will hold the pin in position. Have a person hold the doors while you take out hinge screws and hinges. Replace the hinges with those that are the same size and install the screws with glue. Finally put the hinges in place using clamps or weights until the glue is drying.

Once you have repaired the hinges, you can reinstall the door. You can also attach the handle. Replace the screws using wood dowels of the same size as the original screw to ensure that they match.

Glass that is broken or is damaged

uPVC Windows can become damaged in time, despite the fact they are excellent at keeping cold out and retaining the heat. This can include broken or damaged glass, as well as damaged locks. This is a problem that could be extremely costly if not addressed.  double glazing repair near me  can also affect your home's aesthetics and lead to a loss in insulation. It is crucial to repair any damage immediately.


You can repair your cracked glass by yourself if you have the proper tools and techniques. Be sure that the area surrounding the broken glass is clear of debris to ensure that shards do not cause injury or cause a trip hazard. Then, remove the broken glass pieces and dispose of them in the proper way. Apply masking tape over the entire area. This will stop shards of glass from sticking to your skin and scattering when you move them. Making sure the glass pane is fitted prior to gluing it in place is an ideal option if you are dealing with a window that has two panes. This will ensure that you have enough room to finish your project.

Use a clean, dry cloth to clean the glass's surface and the frame prior to applying the glue. Follow the instructions for application and curing time, which can vary from one product to the next. Depending on the angle of the crack, you may want to secure the glass to hold it in place while it is curing. You can do this using lightweight clamps designed to hold fragile materials.

After the adhesive has fully cured, carefully reinstall the glass into the window frame, making sure that it is flush with the edge of the frame, and there are no gaps between the glass and the window sash. Be careful to avoid flexing the window as it's being installed, as this could weaken the seal and cause condensation and water infiltration.

Contact a professional glazier, like O'Brien(r), to arrange an appointment to replace your glass if the window has been completely broken. It's crucial to act fast if you have broken glass.